PTFE Lined Flange Manufacturers

We now have a highly efficient crew to deal with inquiries from clients. Our intention is "100% shopper pleasure by our merchandise quality, price tag & our staff service" and take pleasure in a very good standing amongst purchasers. With quite a few factories, we can easily provide a wide vary of PTFE Lined Flange, The concept of our corporation is "Sincerity, Speed, Services, and Satisfaction". We're going to follow this concept and get more and additional customers' fulfillment.
PTFE Lined Flange, Our company offers the full range from pre-sales to after-sales service, from product development to audit the use of maintenance, based on strong technical strength, superior product performance, reasonable prices and perfect service, we are going to continue to develop, to offer the high-quality products and solutions and services, and promote lasting cooperation with our customers, common development and create a better future.

Hot Products

  • Joint Wrap Tape

    Joint Wrap Tape

    Joint Wrap Tape is used as thebase material which is coated by the liquid butyl rubber film, both of which are pressed and compounded. Usually its pe film is thinner than the one of nti-corrosion tape while the adhesive layer is much thicker. Joint wrap is used on pipe joints,fabrications,bends,fittings and tie bars.
  • Graphite tape for SWG

    Graphite tape for SWG

    Graphite tape for SWG for making spiral wound gasket. C≥98%; Tensile strength≥4.2Mpa; Density: 1.0g/cm3; Asbestos or non-asbestos tape for SWG are available.
  • Oxygen Free Copper Gaskets

    Oxygen Free Copper Gaskets

    Oxygen Free Copper Gaskets To make a leak tight UHV seal between two conflat flanges, a gasket is required. OFHC (oxygen free high conductivity) copper is normally used as this sealing material as it is very clean, can easily be formed to shape, has a wide temperature range, and has a low outgassing rate.
  • PTFE Coated Studs

    PTFE Coated Studs

    PTFE Coated Studs provides great corrosion resistance, very low coefficient of friction, consistent tensioning and ease of installation and removal. Extensive testing and field use have proven that the future of coated fastener's lies with Fluoropolymer coatings. Previously hot dip, galvanized, cadium or zinc plated fastener's were considered the standard. But these coatings could not stand up to the corrosive atmospheres prevalent in many industries. The most widely used application is on B7 studs with 2H nuts.
  • PTFE Lining in Vessel

    PTFE Lining in Vessel

    We are one of the renowned names in the industry for performing PTFE Lining in Vessel. We can perform Lining as per clients specification/drawing. The material is checked on different quality parameters by our experienced staff.
  • Paint Priming

    Paint Priming

    Paint Priming Black adhesive which is omposed of butyl rubber, resin, antiager,antioxidant, it is coated on the cleaned pipe steel surface.

Send Inquiry