Corrugated Graphite Gasket Manufacturers

Graphite Sheet with Metal Mesh is made of expanded flexible graphite Kaxite B201, reinforced by a metal mesh of SS304 or SS316 or CS, graphite content of more than 98%, the density is 1.0g/cm

Injectable sealant is a carefully controlled blend of high-tech greases and lubricant combined with modern fibers resulting in a superior product. Unlike braided packing, no cutting is necessary. It will conform to any sizes stuffing box and seal it.

Gasket Punch Set 6mm - 38mm*16's punching dies and table. Used for punching holes in soft brass copper and other soft metals as well as leather canvas and gasketing materials. The set is composed of 16 punching dies ranging in size from 6 to 38mm diameter.

Kaxite Epoxy Fiberglass Tube (Style G10) is a pultruded composite tube formed by heat-pressing alkali (E-glass) fabric that has been impregnated with epoxy resin. The cross-wound glass fabric gives the tube nearly equal mechanical strength in the lengthwise and crosswise directions, so it resists crushing and bending without the direction-sensitive weakness of a filament-wound tube. Dielectric strength reaches 22 kV/mm at 0.5–1 mm wall thickness, surface and volume resistivity are 1.0×10¹³ Ω or above, and the dissipation factor Tan δ at 50 Hz is 0.05 or below. Density is 1.70–1.90 g/cm³ and Martens heat resistance is 200°C or above. The tube is used as an electrical and mechanical insulation structural component in generators, transformers, motors, inverters, fixtures and general machine parts. Available in various diameters and wall thicknesses, with wholesale quantity, custom dimensions, OEM labeling and free samples offered.

OFHC Copper Gaskets To make a leak tight UHV seal between two conflat flanges, a gasket is required. OFHC (oxygen free high conductivity) copper is normally used as this sealing material as it is very clean, can easily be formed to shape, has a wide temperature range, and has a low outgassing rate.

Double Head Sheet Nibbler Cutter is to be used with an electric drill or air drill. Capable of cutting any kind of thin metal.