Extruded and molded PTFE tube has the lowest coefficient of friction in all the engineering plastics, the best corrosion resistance. To -180 ~ +260 temperature use.
PTFE Tubing features a low friction coefficient that allows higher flows and easier washdown, while also helping to eliminate process-contaminating residue. The material is flexible, chemical resistant, nonflammable, and heat resistant. It also features a high dielectric strength and is inert to most chemicals and solvents. It is suitable for use in industrial, chemical processing, general laboratory, automotive, insulation, and food service applications.
If your temperature requirements range up to 500º F (260º C), PTFE Tubing (PolyTetraFluoroEthylene) is the recommended choice. It resists “melt-off” by soldering irons when making terminations. Because of its excellent dielectric properties, it is widely used in electronics and electrical service. Another key advantage of PTFE Tubing is its non-stick properities that allow the transport of materials with minimal fluid resistance. Please do be aware, however, that PTFE reacts with fluorine, molten sodium hydroxide and molten alkali metals.
PTFE tubes can be delivered in various diameters and lengths. Up to diameter 120 mm we can supply standard extruded lengths of 1000, 2000 and 3000 mm. Larger diameters up to approx 3000 mm will be moulded. Maximum length depends on the diameter and ranges from 100 mm to 300 mm.
By means of Isostatic pressing we are able to reach the closest diameter near the final required dimension. Due to the flexibility of the press molds we are able to shape the product close to the end product. This can result in significant material saving.
• Excellent chemical resistance
• Working temperature from -190°C to +260°C
• Greatest resistance to fatigue (Wöhler curve)
• FDA approved
• Flame resistant - UL94V0
• No stick
• Low friction
• UV-resistant (does not age)
• Not hygroscopic (water absorption < 0,01%)
• Very good dielectric dielectric insulation properties
Properties of PTFE can be improved by adding additives as carbon, graphite, glass etc.
Pipes are also available in other fluoroplastics, like PFA, FEP, ETFE, PCTFE, PVDF, PEEK and Rulon.
Please contact our sales engineers if you require more information, an inquiry or to evaluate samples. Or download our technical data sheets.
Molded PTFE Tube can be made into non-standard parts by mechanical working, also it can be used as non-sticking materials. It can be used at the temperature of -180℃~+260℃. It has the lowest frictional factor and the best anti-corrosive property among the known plastic materials.
Kaxite is one of the leading China PTFE Micro Porous Filtration Tube suppliers and manufacturers, and with productive factory, welcome to wholesale PTFE Micro Porous Filtration Tube products from us.
Molded PTFE Tube OD: 30mm to 600mm Length: 10mm to 300mm/pc we have virgin molded ptfe tube, filled molded ptfe tube, fiber glass molded ptfe tube, graphite filled molded ptfe tube, bronze filled molded ptfe tube.