Industry News

What are the correct ways to use the Injection Gun?

2018-05-15

1

Before use, check the air pressure and use the air pressure specified in the manual.

2

Air source must use dry, dust-free ordinary compressed air. It is prohibited to use oxygen and any flammable gas to avoid accidental injury.

3

When the spray gun is used, the trigger is pressed by hand so that the passage of the compressed air is first opened, and then the passage of the paint nozzle is opened. Compressed air flows from the pipe to the spray head. At this moment, the paint from the paint nozzle comes into contact. The paint is blown off and sprayed onto the workpiece. When the trigger is released, the orifice of the paint nozzle is tightly sealed by the ejector pin and the compressed air passage is blocked.

4

When the spray gun is used, the trigger is pressed by hand so that the passage of the compressed air is first opened, and then the passage of the paint nozzle is opened. Compressed air flows from the pipe to the spray head. At this moment, the paint from the paint nozzle comes into contact. The paint is blown off and sprayed onto the workpiece. When the trigger is released, the orifice of the paint nozzle is tightly sealed by the ejector pin and the compressed air passage is blocked.

5

Using the auxiliary air passages on the nozzles and the different positions of the nozzles, various paint flows of various shapes can be adjusted.

We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept