Kammprofile Gasket with Integral Outer Ring Kammprofile gasket with machined centering ring > The metallic core is made with a concentrically grooved profile on both sides and a machined centering ring. > Gasket with soft sealing layer both sealing surface.
Kammprofile Gasket with Integral Outer Ring
Style KXT1130 Kammprofile Gasket with Integral Outer Ring
Kammprofile gasket have proven extremely useful in all areas of industry, including the most demanding sealing tasks. Our Kammprofile gaskets
can be found in conventional power plants as well as in the primary circuit of nuclear power plants. In nuclear power plants, they are used e.g. as
a heat exchanger gasket, as a valve cap gasket or as a manhole cover gasket on steam generators or pressurisers
Kammprofile Gasket with Integral Outer Ring is a slight variation than Kammprofile Gasket with loose Outer Ring. The integral outer locating
ring is replaced by a loose fitting, independent, thinner locating ring. The loose fitting ring allows for expansion and contraction without excessive
stress being induced in the solid metal core. Depending on centering ring material and thickness, Kammprofile Gasket with Integral outer ring
may be more economical than Kammprofile Gasket with loose Outer Ring. TKammprofile Gasket with Integral Outer Ring is recommended for
use on standard flat face and raised face flange assemblies.
Advantages
• Outstanding sealing characteristics at a wide range of seating stress levels
• The gasket will not damage the flange surface and can be easily removed
• High resistance to severe temperature & pressure variation
• The gasket cores are reusable reducing cost usage
• Extreme temperature and chemical resistance
• Low initial sealing stress for installation
• Reliable sealing performance
• Can be reused
Application
• High pressure and high temperature applications
• Heat Exchanger and vessel applications
• Small flange widths & damaged flange
• Suitable for a range of chemicals
• Can be used for narrow flanges
• Petrochemical industry
• Coolers., etc
Materials for metal Core
|
Core Materials |
Max Temperature |
Core Materials |
Max Temperature |
Core Thicknes |
|
SS 316L |
550 oC |
Inconel 625 |
450 oC |
2mm, 3mm, 4mm |
|
SS 304 |
550 oC |
Incoloy 825 |
450 oC |
|
|
Monel 400 |
600 oC |
Hastelloy B-2 |
450 oC |
|
|
Nickel 200 |
600 oC |
Hastelloy C 276 |
450 oC |
|
|
Inconel 600 |
900 oC |
Titanium |
350 oC |
|
|
Face Materials |
Max Temp |
Face Materials |
Max Temp |
|
|
Graphite |
550 oC |
PTFE |
260 oC |
Standard size
Thickness: 3.5mm, 4.0mm, 4.5mm, 5.0mm
We also provides other sizes, for details please contact us or send your inquiry directly to us
